Every private label seller eventually hits the same wall: you want to order stock in bulk to get a better unit price and avoid running out mid-campaign, but sending it all into FBA at once eats into your storage limits and racks up long-term storage fees on anything that doesn't sell immediately. Amazon Warehousing and Distribution (AWD) exists to solve exactly this problem, and most sellers running PPC at real volume have either not heard of it or have not worked out whether it is worth using.

At StoreStride we think about inventory flow constantly, because a campaign cannot perform if the product behind it is not on the shelf. This guide explains what AWD actually is, how it differs from standard FBA, what it costs, and when it is worth building into your supply chain so your advertising never outruns your stock.

In short: AWD is Amazon's own bulk warehousing service. You ship large quantities of inventory to an AWD facility at a lower storage cost than FBA, and Amazon automatically replenishes your FBA fulfilment centres from that stock based on your real-time sales velocity — including the demand your PPC campaigns are generating.

What Is Amazon Warehousing and Distribution?

AWD is a bulk storage and replenishment service run directly by Amazon, separate from the standard FBA network. Instead of sending every unit straight into FBA fulfilment centres — where it counts against your storage limits and starts accruing standard or long-term storage fees — you send large shipments into AWD warehouses, which are designed for pallet-level bulk storage at a lower cost per cubic foot.

Amazon then moves inventory from AWD into your FBA fulfilment centres automatically, in smaller batches, timed to your actual sell-through rate. You set the replenishment settings once; Amazon handles the logistics of moving stock from bulk storage into active FBA inventory as it is needed.

AWD vs Standard FBA: The Key Difference

AWD

Bulk, low-cost storage for inventory you are not selling directly from. Designed for pallets and large quantities. Feeds FBA automatically based on sales velocity. Lower storage cost, longer typical dwell time.

Standard FBA

Active, sellable inventory sitting in fulfilment centres ready to ship to customers. Counts against your IPI-linked storage limits. Higher storage cost per unit, designed for fast turnover, not bulk holding.

Put simply: AWD is where your inventory waits, FBA is where it sells. The two work together — you are not choosing one over the other, you are splitting your stock so that only what you need for near-term sales sits in the more expensive, limit-constrained FBA network.

Why This Matters for Your PPC Strategy

Advertising and inventory are usually managed by different people, or at least different spreadsheets, which is exactly why stock-outs happen mid-campaign. AWD closes part of that gap structurally rather than relying on someone remembering to check stock levels:

The failure mode AWD is built to prevent: a campaign performs well, inventory runs out faster than expected, Amazon's algorithm suppresses ad delivery on the now out-of-stock ASIN, and by the time new stock lands the campaign has lost momentum and ranking. Automatic, velocity-based replenishment removes the manual lag that usually causes this.

How AWD Replenishment Actually Works

1

Ship bulk inventory to an AWD facility

Create an AWD shipment in Seller Central the same way you would create an FBA shipment, specifying the ASINs and quantities. AWD accepts larger, less granular shipments than standard FBA, which also tends to simplify freight and customs paperwork for bulk imports.

2

Set your replenishment preferences

Choose automatic replenishment, which lets Amazon decide quantities and timing based on your sales velocity and current FBA stock levels, or manual replenishment, where you trigger each transfer yourself. Most sellers running active PPC campaigns benefit from automatic, since it reacts faster than a manual review cycle.

3

Amazon moves stock into FBA as it sells

As your FBA inventory for an ASIN depletes, Amazon automatically ships replenishment quantities from AWD into the relevant fulfilment centres, keeping your active stock topped up without you placing a new FBA shipment each time.

4

Monitor and adjust as campaigns scale

If you are about to significantly increase PPC spend on an ASIN, review your AWD inventory levels and replenishment settings beforehand so the system has enough bulk stock behind it to keep up with the demand increase you are about to create.

What AWD Costs

AWD pricing is structured around pallet and case-level storage rather than per-unit FBA storage fees, and is generally lower than standard FBA storage for the same volume, which is the core financial case for using it. There is also a processing fee each time inventory is moved from AWD into FBA. Because Amazon updates storage and placement fee schedules periodically, always check the current rate card in Seller Central under AWD before committing to a shipment plan — the exact figures matter less here than the structural point: you are trading a small replenishment fee for meaningfully lower bulk storage cost and reduced stock-out risk.

Run the numbers against your own freight and reorder cycle. For sellers importing in large batches — common with UK sellers importing from overseas manufacturers — the storage cost savings on a large shipment sitting for several weeks or months typically outweigh the replenishment fees by a wide margin.

Who Should Actually Use AWD

High-Volume PPC SpendersBrands running aggressive Sponsored Products and Sponsored Brands campaigns that can sell through stock faster than a standard restock cycle can replace it.
Bulk ImportersSellers placing large purchase orders with overseas manufacturers who want better unit economics without eating FBA storage fees on the full batch immediately.
Seasonal SellersBrands building up stock ahead of Q4, Prime Day, or a specific promotional calendar who need a buffer that does not damage their IPI score while it waits.
Multi-ASIN CataloguesSellers managing restock timing across dozens of SKUs, where manual FBA shipment planning for each one becomes a genuine operational burden.
IPI-Constrained AccountsSellers who have been capped or are close to being capped on FBA storage and need a way to hold bulk stock without it counting against that limit the same way.
Low-Volume New SellersBrands with small, infrequent orders may not see enough benefit to offset the extra shipment planning — standard FBA shipments are often simpler at low volume.

Our view: AWD is not a replacement for good inventory forecasting — it is a buffer that makes your forecasting mistakes less costly. If your PPC plan is ambitious and your restock cycle is slow, AWD is one of the most direct ways to close that gap without constantly firefighting stock-outs.

Scaling PPC but worried about running out of stock?

StoreStride builds campaign pacing around your real inventory position — including whether AWD or a tighter restock cycle makes more sense for your catalogue. Book a free audit and we'll look at both sides together.

Get Free Amazon PPC Audit →

Common Questions About AWD

Is AWD available to all sellers?

AWD is available to professional sellers who use FBA, though eligibility and facility availability can vary by marketplace and account. Check the AWD section in Seller Central to confirm current availability for your account.

Does AWD replace the need for FBA shipments entirely?

No. AWD holds bulk stock and feeds it into FBA automatically — you still need active FBA inventory for Amazon to fulfil customer orders. AWD sits upstream of FBA, not in place of it.

Does using AWD help with the Inventory Placement Service fee?

AWD and the Inventory Placement Service solve different problems — IPS is about which FBA fulfilment centre receives a given shipment, while AWD is about where bulk stock sits before it reaches FBA at all. Sellers often use AWD specifically to reduce how often they need to think about placement and storage limits on large shipments in the first place.

Can I use AWD for seasonal stock only?

Yes. A common pattern is using AWD specifically to stage inventory ahead of Q4 or a major sales event, then relying on standard FBA shipments for steady, predictable demand the rest of the year.