Most sellers who run Sponsored Display stop at product targeting — bidding to appear on competitor ASINs or category pages. That is only half of what the placement can do. The other half, audience targeting, lets you follow a specific shopper based on what they actually did — viewed your listing and left, bought from you before, or spent the last 30 days browsing products in your category — and show them an ad built for exactly that moment in their journey.
For private label sellers, this is the difference between Sponsored Display being a scattergun top-of-funnel placement and it being the most efficient repeat-purchase and cart-recovery channel in the whole account. Here is how each audience type actually works, what lookback window to use, and how to combine them into one coherent funnel.
Product targeting and audience targeting are not interchangeable. Product targeting reaches shoppers based on what they are looking at right now (a competitor's page, a category). Audience targeting reaches shoppers based on what they have already done, wherever they are browsing on or off Amazon. They solve different problems and belong in different campaigns.
What Sponsored Display Audience Targeting Actually Is
When you build a Sponsored Display campaign and choose "Audiences" instead of "Views remarketing" product selections or "Contextual targeting", Amazon gives you access to segments it has already built from shopping behaviour: who viewed a given ASIN and didn't buy, who bought a given ASIN and might want a complementary or replacement product, and broader in-market and lifestyle segments based on category browsing and purchase history across Amazon. Your ad can then follow that shopper across Amazon's own apps and sites, and on supported third-party apps and sites through Amazon's ad network.
This matters because it reaches shoppers at points in the decision cycle that Sponsored Products and Sponsored Brands cannot: after they have left your listing, and before they have searched for your brand by name.
The Core Audience Types
👁 Views Remarketing
Targets shoppers who viewed your product detail page (or a product in the same category) but did not purchase, within a lookback window you choose: 7, 14, 30, 60, or 90 days.
📦 Purchases Remarketing
Targets shoppers who purchased your product, or a related product, within the last 12 months — built for repeat purchase, replenishment, and complementary cross-sell.
🎯 In-Market & Lifestyle Audiences
Pre-built Amazon segments grouped by active shopping intent (in-market for "home gym equipment") or longer-term lifestyle and interest signals, with no direct connection to your own listing's traffic.
Views Remarketing: Recovering Shoppers Who Almost Bought
Views remarketing is built on your own product's traffic. Someone views your listing, gets distracted, compares a competitor, or simply doesn't convert that session — and views remarketing lets you show them an ad for that exact product (or a related one from your catalogue) as they continue browsing Amazon.
The lookback window is the single most important setting here. A shorter window (7–14 days) targets shoppers who were recently close to converting and tends to produce the strongest return, because recall and intent are both still high. A longer window (60–90 days) reaches a much bigger pool but with weaker intent, and works better for considered, higher-price purchases where the decision cycle is naturally longer.
Run views remarketing as its own campaign, separate from product targeting, with creative that reminds the shopper what they looked at rather than generic brand messaging — this is a recovery ad, not an awareness ad.
Purchases Remarketing: Your Highest-LTV Audience
Purchases remarketing targets people who have already bought from you (or, with a wider setup, from competitors in your category), using a 12-month lookback. This is the audience with the lowest acquisition cost in the entire account, because they already trust your brand — you are not persuading a stranger, you are prompting a known customer.
There are three practical ways to use it:
- Replenishment: for consumable or wear-out products, time the ad to arrive just before a typical repurchase cycle ends (e.g. a 60-day supplement, re-targeted at day 45–50).
- Complementary cross-sell: show buyers of Product A an ad for Product B from your own catalogue — a protein shaker to someone who bought protein powder, a replacement filter to someone who bought the device.
- Upsell to a premium or bundle variant: if you have introduced a bundle, multipack, or upgraded version since their original purchase, this audience is the first to show it to.
Purchases remarketing is where Sponsored Display earns its keep for established catalogues. A seller with five or more SKUs in one category should expect this audience type to carry a meaningfully lower ACOS than cold product targeting, simply because the trust barrier is already gone.
In-Market & Lifestyle Audiences: Reaching Shoppers Before They Know You Exist
Unlike views and purchases remarketing, in-market and lifestyle audiences have no dependency on your own traffic. Amazon groups shoppers by active, recent category-level shopping signals ("in-market for running shoes") or by longer-running interest and lifestyle patterns. This is genuine top-of-funnel reach — useful for new product launches with no remarketing pool yet, or for building awareness ahead of a seasonal push.
Treat this audience type with more caution on ACOS expectations. These shoppers have shown category intent, not intent for your specific product, so conversion rates sit meaningfully below views or purchases remarketing. It is a volume and awareness tool, best funded from a top-of-funnel budget rather than measured against the same ACOS target as your bottom-funnel campaigns.
Building a Full-Funnel Sponsored Display Strategy
Top of Funnel — In-Market & Lifestyle Audiences
Used to introduce new or under-exposed ASINs to shoppers with relevant category intent. Budget this separately and judge it on reach and new-to-brand metrics, not ACOS.
Mid Funnel — Competitor & Category Product Targeting
Product targeting campaigns aimed at competitor ASINs and relevant category pages capture shoppers who are actively comparing options. This sits between pure audience targeting and remarketing.
Bottom Funnel — Views Remarketing
Recovers shoppers who viewed your listing but left. This is your highest-priority campaign for conversion recovery and should run continuously, not as a one-off push.
Post-Purchase — Purchases Remarketing
Drives repeat purchase, replenishment, and cross-sell to your existing customer base. The lowest-cost, highest-trust stage of the funnel, and the one most sellers under-invest in.
Each stage should run as its own campaign with its own budget and its own ACOS expectation. Blending audience types into one campaign makes it impossible to tell which stage is actually driving results, and makes budget reallocation guesswork instead of a data-led decision.
Creative and Frequency Considerations
Sponsored Display's standard creative is auto-generated from your listing images and copy, which works adequately for product targeting but undersells remarketing audiences. Where the format allows custom creative, build it to match the funnel stage: a views remarketing ad benefits from a direct, "still interested?" framing with a clear price or offer, while a purchases remarketing ad for cross-sell should show the complementary product clearly rather than reusing the original product's imagery.
Watch frequency on remarketing audiences closely. Views and purchases remarketing pools are smaller than in-market audiences, and without a frequency cap the same shoppers can be served your ad dozens of times a week, which depresses click-through rate over time and wastes spend on an audience that has already made its decision either way. Review impression-per-user patterns monthly and tighten targeting or refresh creative when fatigue sets in.
Common Mistakes We See
- Running only product targeting and never testing audiences. Many accounts never touch audience targeting at all, missing the cheapest conversions in the entire advertising stack.
- Using one 90-day lookback for everything. A single catch-all lookback window blends high-intent recent viewers with low-intent old ones, diluting performance and making the campaign's real ACOS hard to read.
- Ignoring purchases remarketing after launch. Sellers who are diligent about Sponsored Products optimisation frequently leave purchases remarketing switched off entirely, ignoring their best-converting audience.
- Treating in-market audience ACOS the same as remarketing ACOS. Judging a top-of-funnel awareness campaign against a bottom-funnel conversion target leads to cutting the wrong budget.
- No frequency cap on small remarketing pools. Leads to ad fatigue and wasted impressions on shoppers who were never going to convert on the fortieth view.
How We Structure Sponsored Display at StoreStride
When we take on an account, Sponsored Display is almost always either switched off, running on default auto-targeting, or lumped into a single catch-all campaign. We rebuild it into the four-stage funnel above: a top-of-funnel in-market campaign to feed new traffic, a mid-funnel competitor targeting campaign, a views remarketing campaign that runs continuously at a 30-day default lookback (adjusted per product category), and a purchases remarketing campaign built around each client's actual repurchase and cross-sell logic.
We review lookback windows, frequency, and budget allocation across the four stages monthly, shifting spend toward whichever stage is currently converting most efficiently as the product's sales history and seasonality change.
Not using Sponsored Display audiences yet?
We audit your full advertising stack — Sponsored Products, Sponsored Brands, and Sponsored Display — and show you exactly where the easiest wins are sitting unused. Get in touch today.
Get Free Amazon PPC Audit →Common Questions About Sponsored Display Audience Targeting
Do I need Brand Registry to use audience targeting?
No. Audience targeting on Sponsored Display is available to any seller running Sponsored Display, regardless of Brand Registry status. Brand Registry unlocks additional creative and reporting options elsewhere in Amazon Ads, but not audience targeting itself.
Can I target a competitor's customers with purchases remarketing?
Amazon's purchases remarketing audiences are generally built around your own ASINs and related category purchases, not a direct list of a named competitor's buyers. Broader category-level in-market audiences are the closer equivalent for reaching shoppers who buy in your space without having bought from you specifically.
How quickly do views remarketing audiences update?
Audiences refresh continuously based on your chosen lookback window — a shopper who viewed your listing today is eligible almost immediately, and one who viewed it outside your chosen window ages out automatically without any manual list management.
Should audience targeting replace product targeting?
No. They serve different stages of the funnel and should run side by side as separate campaigns. Product targeting captures active comparison shoppers on competitor and category pages; audience targeting recovers and retains shoppers based on their own behaviour history.